Decking In Lingfield
This is a softwood treated decking which was purchased from Lawsons Timber. Holes were dug out for 4×4 uc4 posts to be concreted into place with Hanson fastest postfix. 5×2 joists were cut to correct length and fixed to vertical upright posts. Deck boards were cut at both ends to leave a precise finish. Decking…
Read MoreDecking In Weybridge
Decking In Reigate
This is a softwood treated decking with handrail. A timber structure was built with 4×2 c24 pressure treated timber and set out at correct spacing for deck boards. As this structure was built on a slope and 3 feet of the ground diagonal braces were introduced throughout the structure. 3×3 pressure treated posts were concreted…
Read MoreDecking In Esher
This is a softwood treated decking in Esher. A 4×2 timber joist structure was build to carry deck boards. Structural hex head screws were used to fix timber joists together. 4×4 pressure treated posts were concreted into position to carry joists. Deck boards were set out with correct gap between each board to allow for…
Read MoreDecking Stairs Built In Guildford
Decking In Richmond
Composite Decking In Staines
This is a composite deck in Staines which was built on a existing concrete base. Concrete slabs were lifted and skipped. 5×2 pressure treated timber bought from Alloway timber was used in this deck structure. The deck board was purchased from Selco. Hex head structural screws were used to fix joists together. Weed mat was…
Read MoreComposite Decking In Guildford
This is a composite decking made by Timbertech. A timber structure of 5×2 was build to size of deck. All timber was pressure treated. UC4 4 x4 posts were set out and concreted into ground as uprights to support structure. Structural hex head screws were used to fix timber structure to posts. Deck boards were…
Read MoreDecking In Epsom
This is a softwood treated decking in Epsom. Old patio was lifted and skipped. Holes were dug out for new 5×2 deck joisting to be set out. 4×4 pressure treated posts were used as uprights, concreted into ground. All deck boards were cut at both ends with a dewalt chopsaw to leave a accurate cut…
Read More