Decking In Reigate

This is a softwood treated decking with handrail. A timber structure was built with 4×2 c24 pressure treated timber and set out at correct spacing for deck boards. As this structure was built on a slope and 3 feet of the ground diagonal braces were introduced throughout the structure. 3×3 pressure treated posts were concreted…

Read More

New Lapped Panel Fence In Reigate

This is a new lapped panel fence replacement in Reigate. The old fence was in bad condition and could not be repaired. This was explained to the homeowner and they were happy for a new fence to be installed. The old fence was taken out and some bushes removed as well. A 8 yard skip…

Read More

Bespoke Rad Cover In Reigate

This is one of four bespoke radiator covers I made for a job in Reigate. Visited property to write down sizes of radiators and discussed style that the client wanted. A date was arranged and came back to make them. 18mm mdf was used to make radiator cover with a panel of decorative diamond slatted…

Read More

Carpentry In Reigate

This is a corner unit built in Reigate. The height of Shelves were set to the clients needs. All material was purchased from Lawsons Timber. A work bench was setup outside of property. A festool saw with track was used to cut all  18mm mdf to size. A chopsaw was used to cut all softwood…

Read More

Odd Jobs Reigate

This is a Keter Plastic Shed build in Reigate. Shed was unpacked and assembled to manual supplied. A cordless drill was used to assemble shed and packaging was skipped. This is a strong, durable shed that looks well and easy to move around garden.

Read More

Odd Jobs Reigate

This is a small garden wall repair in Reigate. Pillar had been damaged so a few brick were supplied to match existing brick. Old brick was cleaned down and reused. Capping was fitted at the last.

Read More

Door Fitting In Reigate

This is new 4 panel moulded doors and handles was purchased  from Howdens Joinery. The existing doors were removed and skipped. The new doors were cut to size, hinged and hung. A 3mm gap was left along sides and top of door. A 8mm gap was left underneath door. Handles were then fitted to complete…

Read More